Investigation of surface and thermogravimetric characteristics of carbon-coated iron nanopowder

Demand for high-density press and sinter components is increasing day by day. Of the different ways to improve the sinter density, the addition of nanopowder to the conventional micrometer-sized metal powder is an effective solution. The present investigation is aimed at studying the surface chemistry of iron nanopowder coated with graphitic carbon, which is intended to be mixed with the conventional iron powder. For this purpose, iron nanopowder in the size range of 30 nm to submicron (less than 1 micron) was investigated using thermogravimetry at different temperatures: 400°C, 600°C, 800°C, 1000°C, and 1350°C. The X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and high-resolution scanning electron microscopy (HR-SEM) were used for characterizing the powder as well as samples sintered at different temperatures. The presence of iron, oxygen, carbon, chromium, and zinc were observed on the surface of the nanopowder. Iron was present in oxide state, although a small metallic iron peak at 707 eV was also observed in the XPS spectra obtained from the surface indicating the oxide scale to be maximum of about 5 nm in thickness. For the sample treated at 600°C, presence of manganese was observed on the surface. Thermogravimetry results showed a two-step mass loss with a total mass loss of 4 wt.% when heated to 1350°C where the first step corresponds to the surface oxide reduction.     

Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.     

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 μL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.     

Towards the meV limit of the effective neutrino mass in neutrinoless double-beta decays

We emphasize that it is extremely important for future neutrinoless double-beta(0νββ)decay experiments to reach the sensitivity to the effective neutrino mass|mββ|≈1 meV.With such a sensitivity,it is highly possible to discover the signals of 0νββ decays.If no signal is observed at this sensitivity level,then either neutrinos are Dirac particles or stringent constraints can be placed on their Majorana masses.In this paper,assuming the sensitivity of|mββ|≈1 meV for future 0νββ decay experiments and the precisions on neutrion oscillation parameters after the JUNO experiment,we fully explore the constrained regions of the lightest neutrino mass m1 and two Majorana-type CP-violating phases{ρ,σ}.Several important conclusions in the case of normal neutrino mass ordering can be made.First,the lightest neutrino mass is severely constrained to a narrow range m1∈[0.7,8]meV,which together with the precision measurements of neutrino mass-squared differences from oscillation experiments completely determines the neutrino mass spectrum m2∈[8.6,11.7]meV ing phases is limited to ρ∈[130°,230°],which cannot be obtained from any other realistic experiments.Third,the sum of three neutrino masses is found to beΣ≡m1+m2+m3∈[59.2,72.6]meV,while the effective neutrino mass for beta decays turns out to be mβ≡(|Ue1|2m1^2+|Ue2|2m2^2+|Ue3|2m3^2)1/2∈[8.9,12.6]meV.These observations clearly set up the roadmap for future non-oscillation neutrino experiments aiming to solve the fundamental problems in neutrino physics.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

含硫氨基酸与本征及缺陷石墨烯表面的相互作用

半胱氨酸及蛋氨酸是人体的两种含硫氨基酸,在生物活性中发挥着巨大的作用.本研究采用密度泛函理论方法对以上两种氨基酸在本征及缺陷石墨烯表面的吸附机理进行了详细研究.主要考虑了两种吸附体系:半胱氨酸及蛋氨酸平躺在两种石墨烯表面;两种氨基酸垂直地放置于两种石墨烯表面,且含硫的基团靠近表面.研究结果表明,半胱氨酸及蛋氨酸初始构型对它们之间的相互作用有一定的影响.两种氨基酸平躺时有较大的吸附能.此外,吸附能的结果显示两种氨基酸可以更好的与缺陷石墨烯表面紧密结合.同时,蛋氨酸与本征及缺陷石墨烯相互作用均大于半胱氨酸与本征及缺陷石墨烯相互作用.模拟结果有望为含硫氨基酸的石墨烯传感器提供有用的指导.     

High Uptake of ReO4− and CO2 Conversion by a Radiation‐Resistant Thorium–Nickle [Th48Ni6] Nanocage‐Based Metal–Organic Framework

Assembled from [Th₄₈Ni₆] nanocages, the first transition‐metal (TM)‐thorium metal–organic framework (MOF, 1 ) has been synthesized and structurally characterized. 1 exhibits high solvent and acid/base stability, and resistance to 400 kGy β irradiation. Notably, 1 captures ReO₄^? (an analogue of radioactive ⁹⁹TcO₄^?, a key species in nuclear wastes) with a maximum capacity of 807 mg g^?1, falling among the largest values known to date. Furthermore, 1 can enrich methylene blue (MB) and can also serve as an effective and recyclable catalyst for CO₂ fixation with epoxides; there is no significant loss of catalytic activity after 10 cycles. Theoretical studies with nucleus‐independent chemical shifts and natural bond orbital analysis reveal that the [Th₆O₈] clusters in 1 have a unique stable electronic structure with (d–p)π aromaticity, partially rationalising 1 ′s stability.     

非Hermitian正定线性方程组的外推的HSS迭代方法

为了高效地求解大型稀疏非Hermitian正定线性方程组，在白中治、Golub和Ng提出的Hermitian和反Hermitian分裂（HSS）迭代法的基础上，通过引入新的参数并结合迭代法的松弛技术，对HSS迭代方法进行加速，提出了一种新的外推的HSS迭代方法（EHSS），并研究了该方法的收敛性.数值例子表明：通过参数值的选择，新方法比HSS方法具有更快的收敛速度和更少的迭代次数，选择了合适的参数值后，可以提高HSS方法的收敛效率.